Installation And Assembly - Kripsol KSX Pro Manual De Instrucciones

3.6
Those elements of the equipment wich,
when functioning, are in movement or which
could reach dangerous temperatures, will
be protected with cages or casing which will
prevent accidental contact with the same.
3.7
Electricity conductors, or parts which could
carry current, will be suitably insulated. Other
metal parts of the equipment will be correctly
earthed.
3.8
Spare parts that may be necessary will be
originals from the manufacturer or those
recommended by the manufacturer. The use
of others, or originals rectified by others, are
not permitted and release the manufactured
of distributor from all liability.
4. PACKING, TRANSPORT AND
STORAGE
4.1
ATTENTION
The manufactured supplies the equipment
protected in suitable packaging, so that it
is not damaged during transport or storage
thus preventing its correct installation and/or
functioning.
KSX Pro / KS Evo -
ENGLISH
4.2
The user, upon receipt of the equipment, will
immediately check the following points:
- Condition of the outside packaging, if this
shows sings of serious deterioration, he
shall formally advise the person delivering
the equipment.
- He shall also check the condition of
the contents; should this show defects
which would presumably prevent correct
functioning, he shall also formally notify
the supplier within a period not exceeding 8
days from the date of delivey.
4.3
Storage conditions must ensure the optimum
preservation of the equipment. Due to its
particular relevance, we must stress that very
damp atmospheres or others where brusque
changes
condensation) must be avoided

5. INSTALLATION AND ASSEMBLY

5.1. LOCATION.
The place where the electropump is to be
located must be dry. In all events, there must
be a drain in the floor as a prevention against
flooding. If the pump is to be located in a
damp place, a ventilation system must be
provided in order to prevent the formation of
condensation.
12
ATTENTION
ATTENTION
in temperatures (which
ATTENTION
cause