To Use The Leaf Net
1. Extend the telescopic pole to the desired length.
2. Attach the leaf net to the open end of the telescopic pole.
3. Scoop out leaves and other debris from the pool.
Spring
Latch
IMPORTANT NOTE: For vacuuming with other Polygroup
directions on page 4 of this manual.
Directions for Vacuuming With Polygroup
1. Extend the telescopic pole to its fullest length.
3. Turn on the Skimmer Pump, water will start to flow to the pool through the
return fitting. Keep the pump running throughout the vacuuming process.
4. Hand tighten the water hose cap of the vacuum head.
6. Attach the 1¼" flexible hose to the vacuum head and tighten the hose clamp.
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
2
OPERATION INSTRUCTIONS
Filter Pump Systems; Models: CP2000-C, RP, RX and Sand Filtration Systems; Please follow the
®
Summer Waves Skimmer Pump Models SFX Only.
®
Extended operating days and hours during peak season requirements.
OWNER'S MANUAL
2. Attach the vacuum head to the open end of the telescopic pole.
5. Loosely attach the hose clamps over the cuffs on the open ends of the flexible hose.
7. Put the vacuum head under water.