Aux Connection - Beurer WL 50 Instrucciones De Uso

3. To deactivate Bluetooth
pears in the display. The Bluetooth
4. To switch between individual songs stored on the connected device on the wake up light,
briefly press the
5. To set the volume on the wake up light, press and hold the
6. Press the Mode button to exit Bluetooth

7.9 AUX connection

You can connect an external audio source (e.g. MP3 player, smartphone or CD player) to the
wake up light via the AUX input.
1. Connect the supplied AUX cable to an audio source (e.g. smartphone).
2. Insert the other end of the AUX cable into the AUX input on the rear of the wake up light.
3. Press the Mode button three times. AUX appears in the display. The external audio source is
now connected to the wake up light.
4. The music settings can only be adjusted on the paired device, not on the wake up light itself. It
is also possible to adjust the volume on the wake up light.
5. Press the Mode button to exit AUX mode again.
on the wake up light, press the Mode button until the time ap-
®
symbol
®
or button.
mode again.
®
goes out.
43
or the button.