Maintenance; Storage - autoXS 16478 Manual Del Usuario

USA

Maintenance

1. Before cleaning, pull the 12 V plug out of the 12 V on-board power socket.
2. Let the heated car seat cushion cool off completely.
3. Wipe the heated car seat cushion off with a damp cloth.
4. Then let all parts dry completely.
Maintenance
The 12 V plug has a fuse for protecting the on-board electrical system of the
vehicle. Check and replace the fuse if the heated car seat cushion is no longer
functioning (see fig. E).
1. Screw the screw adapter
direction.
2. Remove the plug tip
3. Remove the fuse
4. Place a new glass tube fuse (F5AL250V) on the coil spring
5. Put the plug tip back on the new fuse.
6. Screw the screw adapter onto the 12 V plug by turning it clockwise.

Storage

− Let the heated car seat cushion cool off completely.
− Store the heated car seat cushion in a clean and dry place.
− Store the heated car seat cushion so that it is not accessible to children.
− Avoid creasing of the heated car seat cushion during storage caused by
heavy objects that are placed on it.
− Do not put heavy objects on the heated car seat cushion.
16
office@walsergroup.com
11
off of the 12 V plug
10
.
9
.
7
in a counterclockwise
8
.
AFTER SALES SUPPORT
800 222 0999
USA