Introduction; Pump Heads; Application Data; General Description - Cole-Parmer Carter manostat 74-046-00000 Manual De Operación

Sistema de cabeza debomba de cassette
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

INTRODUCTION

These multi-channel peristaltic pumps accommodate two sizes of snap-in tubing Cassettes which provide balanced,
adjustable flow via instantly changeable occlusion setting.
The instructions in this manual are task-oriented for easy reference. You can go directly to a particular section and
quickly find the answers.
Model 74-046-00000
Model 74-048-00000
Model 74-126-00000
Model 74-128-00000
Model 72-560-000
Model 72-560-100
These Cassette Pumps are designed to provide up to 12 simultaneously driven pump channels and the ability to
provide nearly pulse free flow. In addition the pump systems incorporate the following features.
g 5:1 speed reduction on models 74-126-00000 and 74-128-00000 providing ultra low flow rates.
g 12 Cassette capacity of models 74-126-00000 and 74-128-00000 permit dispensing simultaneously into a
12 bank set of test tubes with one set-up and pump cycle.
g Six and eight roller designs provide reduced pulsation.
g Elimination of "suckback" and greatly reduced pulsation by pairing Cassettes with offset occlusion.
g Low friction rollers for minimum abrasion of tubing.
g Auto-resetting limit clutch built in to protect the Pump and Drive in case of excessive overload on models
74-126-00000 and 74-128-00000.

(1) Application Data

The six or eight roller Cassette Pump Systems are designed for multi-channel use where low pulsation and/or close
occlusion control of a variety of different flows is required in low flow applications. The Pump is to be used with
MANOSTAT tubing links and delivers from .0018 to 360 mL/min.

(2) General Description

Each Pump Head System (see Figure 1) is composed of a multi-roller Pump Head and two sizes of snap-in tubing
Cas-settes, each with individually adjustable occlusion settings. The occlusion "wedge" design provides accurate and
morebalanced flow control.
The Pump Heads contain either six or eight rollers. All models can operate with a variety of tubing links and with either
the small or the large Cassettes. However, the six roller models are optimized for the large Cassette and MANOSTAT
4
MODEL
MODEL

Pump Heads

6 Roller, 2 Large or 4 Small Channel (CARTER 4/6)
8 Roller, 2 Large or 4 Small Channel (CARTER 4/8)
6 Roller, 6 Large or 12 Small Channel (CARTER 12/6)
8 Roller, 6 Large or 12 Small Channel (CARTER 12/8)
Cassettes
TYPE
TYPE
Small
Large

Publicidad

Tabla de contenido
loading

Tabla de contenido