Operation - KERN FEJ-A07 Manual De Instalación

4 Operation

• Connect mains adapter and start the balance by pressing the ON/OFF key
• Entering limiting values
• Evaluation of readings via relay contacts
• Status balance/contact
Status balance
Reading outside condition
Reading outside range
Input of invalid values
Error message
(o-ERR/u-ERR)
During input
Waiting for stability mes-
sage as per tares
Stand-by
Sleep mode
Automatic check of bal-
ance at starting
• Output by external signal
Contacts and audio signals are started by the weighing result, but may also
be triggered by an external signal
Whilst setting the menu [2B. R.Q.m. 2] there is an output of the weighing re-
sult for approx. 200 ms after the signal was applied
If a pulsed external signal is used, the output signal will follow after 100 ms
at the earliest
FEJ-A07-IA-defsi-0610
Display
No reading display
No reading display
Three symbols appear
on the left
o-ERR/u-ERR
Input appears on display
[M ] flashing
Stand by LED glowing
Sleep LED glowing
[88888888] glowing
Contact
inactive
inactive
inactive
• OFF during measure-
ment of limits 1-5
• ON during ERR
inactive
Last display fixated
inactive
Output of evaluation result
inactive
15