Important Notes; Service And Repair Indicators - 3M MicroTouch M1500SS Guia Del Usuario

3M™ MicroTouch™ Display M1500SS User Guide
Intended Use
The 3M™ Touch Systems Touch Displays are designed for touch input and tested to
replace an existing display. These displays are intended for professional installation and
use in an indoor environment. They are not designed or tested for use in hazardous
locations. Use in any other application has not been evaluated by 3M and may lead to
an unsafe condition.

Important Notes


Plug power cord into appropriate power source.

Plug power cord into a grounded receptacle.

When unplugging power supply cord, pull on plug not cord.

Do not connect or disconnect this product during an electrical storm.

Install the display in a well-ventilated area. Always maintain adequate ventilation to
protect the display from overheating and to ensure reliable and continued operation.

Do not expose this display to heat. Passive heat may cause damage to the case and
other parts.

Do not install this display in areas where extreme vibrations may be generated. For
example, nearby manufacturing equipment may produce strong vibrations. The
vibrations may cause the display to exhibit picture discoloration or poor video
quality.

Ensure that metal does not contact the touch sensor.

To avoid ergonomic concerns:
Do not install the display in a manner or location with awkward accessibility.
Extended use may result in muscle, tendon, or fixed posture strains. It is
recommended you take periodic breaks from continuous use.

Service and Repair Indicators

Do not attempt to service this unit yourself. Removing the display cover may expose
you to dangerous voltage or other risks and will void the warranty.
Unplug the display from the power outlet and refer servicing to qualified service
personnel in the event that:

Liquid is spilled into the product or the product is exposed to rain or water.

The product does not operate properly when operating instructions are followed.

The product has been dropped or the case has been damaged.

The product shows a distinct change in performance, indicating a need for service.

The power cable or plug is damaged or frayed.
3M Touch Systems, Inc. Proprietary Information
3