Get To Know Your Device; Prior To Startup; Setting The Operating Temperature /3 - Teka Combi NFE 400 Manual De Instrucciones

en

Get to know your device

Waring
Below information about accessories are
supplied just for reference. Below accessories
may not be exactly same as the accessories
of your appliance.
Fig. 1
A) Fridge compartment
B) Freezer compartment
1. Control panel
2. Interior light
3. Movabale shelves
4. Wine rack
5. Thermostat knob
6. Crisper cover
7. Salad crisper
8. Ice bank
9. Freezer compartment
10. Adjustable front feet
11. Adjustable door shelves
12. Egg tray
13. Door shelf

Prior to startup

Before you begin operating your device,
the following points should be re-checked for
safety:
• Is the device standing properly on the floor?
• Is there sufficient space for good air
circulation?
• Is the interior clean? (Also see the section
"Cleaning and care")
• Now connect the appliance to the mains.
The compressor is turned on; the interior light
comes on when the Fridge door is opened.
Do not place foodstuff into the refrigerator until
the temperature has reached the desired level.
Setting the operating temperature
Freezer Compartment Temperature can be
adjused by the electronic display (Fig 2)
The temperature of the fridge compartment
depends on coming amount of air from the
freezer compartment.
You make the temperature adjustment of the
fresh food compartment by adjusting the knob
between 1 and 5 positions which is placed on
the back wall of the fridge compartment (Fig 6)
1 = Lowest cooling setting(Warmest setting)
2 = Highest cooling setting(Coldest setting )
Control Panel
Control Functions
Considering Figure 2, the following functions
are implemented on the appliance.
a) Focus-Cool
b) Freezer Set
c) Eco-Fuzzy
d) Quick Freeze
e) Actual Fridge Temperature
f) Actual Freezer Temperature
g) Freezer Bar Graphs
h) Focus-Cool Icon
i) Economy Icon
j) Eco Fuzzy Icon
k) Quick Freeze Icon
l) Alarm Icon
3
en