Maintenance: Removing And Replacing The Brush Roll - Hoover IMPULSE Manual Del Usuario

Maintenance: Removing and Replacing the Brush Roll

1
3
WARNING
To reduce the risk of personal injury from moving parts, turn the power
switch to OFF and disconnect all accessories before servicing.
18
Remove Powered Nozzle from Reach Wand.
Turn the Powered Nozzle upside down. Slide
the Brush Roll Release Button.
Clear any threads or hair from both ends of
the brush roll and any dirt or debris inside
the housing of the Powered Nozzle.
Lift the end of brush roll to remove from the
Powered Nozzle.
2
Re-fi t the brush roll into the housing.
4