Klarstein Cura 224 Uno Manual Del Usuario página 17

Installation
• The device can be installed freestanding only.
• Place the device on a surface that can support the device with full load. Adjust small
bumps with the adjustable feet on the bottom of the wine cooler. The device must be
straight.
• Place the device in a location where it is not in direct sunlight, and away from heat
sources (oven, heating, radiators). Direct sunlight can affect the acrylic coating,
and heat sources can increase electrical consumption. Extreme cold ambient
temperatures may cause the device to malfunction.
• Do not place the device in damp rooms.
• Only connect the device to grounded sockets. If you are not sure whether your
connections meet the requirements, consult an electrician.
Important instructions on the electrical connection
CAUTION
Danger of electric shock. Improper use of the grounded plug may result
in an electric shock. If the power cord is damaged, it must be replaced
by a qualifi ed electrician or an authorized specialist company.
• The device should always be plugged into its own socket. Check the voltage on the
rating plate before use. Only connect the device to sockets which correspond to the
voltage of the device. This prevents overloading of the domestic power supply and
fi re hazard due to overheating.
• Do not pull the plug out of the socket by the cord, but rather hold the plug in your
hand when removing it.
• If the power cord or the plug are damaged, they must be replaced by the
manufacturer, an authorized specialist company or a similarly qualifi ed person.
• When you move the device, make sure that the power cord is not damaged.
EN
17