To Fill The Steam Feeder - LG DLEX5101W Manual Del Usaurio

STEAm FUNCTIONS

To Fill the Steam Feeder

Open the lid.
1
Lift out the steam feeder.
2
2
1
IMPORTANT NOTES ABOUT STEAM CYCLES
Before using a Steam Cycle, the steam feeder must be filled with water up to the MAX line. If not, the
ADD WATER light will blink. Make sure that the steam feeder is filled with water and the cartridge is
completely connected. Turn the dryer off then restart the Steam Cycle.
• O nly use water. Do not fill the steam feeder with foreign substances, rinse agents, or detergents.
• Before moving the dryer, make sure the steam feeder is empty.
• Do not use distilled water; the water level sensor in the steam generator will not work.
• Be careful while filling the steam feeder to avoid overflow and spilling.
• Wipe up any spilled water around the steam feeder and the drawer before starting the dryer.
wWARNING:
• D o not fill the steam feeder with liquids such as gasoline, dry-cleaning solvents, or other flammable or explosive
substances. They give off vapors that could explode.
• Do not fill the steam feeder with hot water (over 86°F/30°C).
• Do not drink water from the steam feeder.
(cont.)
Lid
Fill the steam feeder just to the filter screen.
3
Water
ONLY
Steam
Feeder
Place the steam feeder in the square barrel,
4
then cover the lid.
33