Safescan 1250 Manual página 7

8. USE WITH THE OPTIONAL SAFESCAN TP-230 PRINTER
The Safescan 1250 can be connected to the optional Safescan TP-230 thermal printer, which will provide you with a detailed
breakdown of the count results. Before you can start using the printer, the baudrate setting of the printer needs to be adjusted
from 9600 (default setting of printer) to 1200. Please follow the steps below.
1. ENTER PARAMETER SETUP MODE
A.
Switch off the power
OFF
D.
Release the FEED button whilst
keeping SET pressed
The printer is now in the Parameter setup mode and it will print the first parameter of the settings menu (baudrate).
2. SELECT THE PARAMETER YOU WISH TO CHANGE
By pressing SET, you can scroll through the various items that can be changed.
This sequence is a loop and is as follows:
B.
Press the SET and FEED
buttons simultaneously
SET
The red error LED will blink.
E.
Press FEED twice whilst keeping
SET pressed
ON
2x
www.safescan.com
C.
Switch on the power. Keep SET
and FEED pressed
+
ON
FEED
F.
Release the SET button
FEED
ENGLISH
+
SET FEED
7