Safescan 1250 Manual página 8

ENGLISH
SET
Baudrate
SET
Every time you press SET, the printout will show which parameter is selected, plus its current setting. The next step shows
how to change the setting.
3. CHANGE THE PRINTER BAUDRATE
Once you are in the setting for the baudrate adjustment, the desired value can be selected by pressing FEED. Every time
you press FEED, the applicable value will be printed. Keep pressing FEED until "1200" is printed. The baudrate setting
sequence is a loop and is as follows:
Baudrate
4. SAVE THE SETTINGS.
A.
Press both the SET and FEED
button
SET
The printout will now show Exit Set mode. The settings have been saved.
PLEASE NOTE: When the changes are not saved, the printer will go back to default settings after it has been switched off.
For detailed operating instructions please refer to the Safescan TP-230 user manual, included with the printer.
ON
8
SET
Data Bit
Parity
Handshake
SET
Union
FEED
9600
(default)
FEED
FEED
4800
B.
Release FEED while still pressing
SET
+
FEED
www.safescan.com
SET
Language
SET
Direction
FEED
19200
FEED
2400
SET
Font
SET
Black Mark
FEED
38400
FEED
1200
(required for
coin counter)
C.
Release the SET button
Density
SET
Sensor
57600
FEED
115200