Electromagnetic Fields (Emf); Preparing For Use; Mains Operation; Operation On Non-Rechargeable Batteries - Philips AVENT SCD600 Manual De Instrucciones

EngliSh
8

Electromagnetic fields (EMF)

This Philips AVENT appliance complies with all standards regarding electromagnetic fields (EMF). If
handled properly and according to the instructions in this user manual, the appliance is safe to use
based on scientific evidence available today.

preparing for use

Baby unit
You can use the baby unit from the mains or on non-rechargeable batteries. Even if you are going to
use the unit from the mains, we advise you to insert non-rechargeable batteries. This guarantees
automatic back-up in case of mains failure.

Mains operation

1 Put the appliance plug in the baby unit and put the adapter in a wall socket (Fig. 2).

operation on non-rechargeable batteries

The baby unit runs on four 1.5V R6 AAA batteries (not included). We strongly advise you to use
Philips R06 PowerLife batteries.
Do not use rechargeable batteries, as the baby unit does not have a charging function.
Unplug the baby unit and make sure your hands and the unit are dry when you insert non-
rechargeable batteries.
1 Remove the screw in the battery compartment lid with a flathead screwdriver (Fig. 3).
2 Remove the battery compartment lid. (Fig. 4)
3 Insert four non-rechargeable batteries (Fig. 5).
Note: Make sure the + and - poles point in the right direction.
4 Reattach the lid.
5 Fasten the screw with a flathead screwdriver.
parent unit
operation on rechargeable battery
Unplug the parent unit and make sure your hands and the unit are dry when you insert the
rechargeable battery.
The parent unit comes with a rechargeable Li-ion 1050mAh battery.
Charge the parent unit before you use it for the first time or when the parent unit indicates that the
battery is low (when the empty battery symbol flashes on the video display and the battery light on
the parent unit flashes green).
Note: If the battery is completely empty, the parent unit automatically switches off and loses contact with
the baby unit.
1 Slide down the battery compartment lid to remove it (Fig. 6).
2 Insert the rechargeable battery (Fig. 7).
Note: Make sure the + and - poles point in the right direction.
3 Reattach the lid (Fig. 8).
4 Insert the appliance plug into parent unit and put the adapter in a wall socket (Fig. 9).
The battery light on the parent unit lights up blue and the video display shows a battery
,
symbol (Fig. 10).
When the battery is fully charged, the battery light turns green.
,