Electromagnetic Fields (Emf); Preparing For Use - Philips SCD535 Manual Del Usuario

•
Take every precaution to make sure that your
baby can sleep safely .
• The humidity and temperature
sensor only measures the temperature and
humidity in the baby room. It cannot be used
to control or adjust the temperature and
humidity in the baby room.
3.0.5 Important information about non-
rechargeable batteries and the
rechargeable battery pack
•
Non-rechargeable batteries and the
rechargeable battery pack may explode
if exposed to sunshine, fire or high
temperatures due to other causes.
•
Always place a rechargeable battery pack
of the correct type in the parent unit to
avoid the risk of explosion. Do not use non-
rechargeable batteries to avoid the risk of
explosion.
•
Always place non-recheargeable batteries of
the correct type in the baby unit to avoid the
risk of explosion. The baby unit does not have
a charging function.
• Make sure that your hands are dry when you
insert or replace non-rechargeable batteries
or the rechargeable battery pack.
•
To avoid damage due to leakage of non-
rechargeable batteries or the battery pack:
1 Do not expose the appliance to
temperatures higher than 35°C.
2 Remove the rechargeable battery pack of
the parent unit and the non-rechargeable
batteries of the baby unit if you are not
going to use the appliance for one month
or more.
3 Do not leave empty non-rechargeable
batteries in the baby unit.
•
Dispose of non-rechargeable batteries and
the rechargeable battery pack properly (see
chapter 'Environment').
3.0.6 Electromagnetic fields (EMF)
This Philips AVENT appliance complies with all
standards regarding electromagnetic fields (EMF). If
handled properly and according to the instructions
in this user manual, the appliance is safe to use
based on scientific evidence available today.

4 Preparing for use

4.1 Baby unit
You can use the baby unit from the mains or
on non-rechargeable batteries. Even if you are
going to use the unit from the mains, we advise
you to insert non-rechargeable batteries. This
guarantees automatic back-up in case of mains
failure.
4.1.1 Mains operation
Put the large appliance plug in the baby unit
1
and put the adapter in a wall socket (Fig. 2).
4.1.2 Operation on non-rechargeable
batteries
The baby unit runs on four 1.5V R6 AA batteries
(not included). We strongly advise you to use
Philips LR6 PowerLife batteries.
Do not use rechargeable batteries, as the baby
unit does not have a charging function.
Place batteries in the baby unit if you do not want
to use it from the mains or if you want to be sure
of backup power in case of mains failure. Replace
the batteries when the baby unit indicates that
the batteries are low (the empty battery symbol
flashes on the display and the text 'Battery low'
appears).
Warning:
B
Unplug the baby unit and make sure your hands
and the unit are dry when you insert the non-
rechargeable batteries.
Remove the lid of the compartment for non-
1
rechargeable batteries (Fig. 3).
Insert four non-rechargeable batteries (Fig. 4).
2
Note:
D
Make sure the + and - poles point in the right
direction.
Reattach the lid (Fig. 5).
3
7