Battery Management; Sensitivity Adjustment; Sensor Exchange - Refco TRITECTOR-R Manual De Instrucciones

Battery Management

To increase the battery life time, the TRITECTOR has two functions:
Auto shut off:
After 10 minutes without pressing any button, the device will turn off.
Auto Backlight:
After three minutes, the display reduces its brightness to approximately
20%. If a leak is detected, the brightness will increase to 100%.

Sensitivity Adjustment

Set the sensitivity level by pressing
L M H indicates the sensitivity level: L=low, M=medium, H= high.
Mute
If desired, the audible sounds can be disabled. By momentarily pressing
, the sound switches off or on.
By turning off the sound, you only have the visual indicator of a
leak. No audible indication will occur.
6.3

SENSOR EXCHANGE

Make sure the device is turned off before you change the sensor.
To change the sensor, the sensor holder must be turned to the left to
release it. Then the sensor can be carefully unplugged and pulled out.
The sensor must not be turned, as this can damage the sensor.
When replacing the sensor, the current sensor may be hot.
Sensor holder
9
.
Sensor Head
Instruction Manual