Setting The Print Head Gap - TallyGenicom 7265 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Settings
FormAdj= 17/72"
Online
Set
<
>
Exit
1
2
3
4
Setup
The setting made will be retained after switching off the printer. For more details, please re-
fer to the Reference Manual on the Online CD-ROM.
Setting the print
The printer features automatic print head gap adjustment to the thickness of the paper used. In
head gap
setup mode, you can enter a correction value to modify the head gap that is normally deter-
mined automatically. This correction is useful for modifying the appearance of the type face
and the impact force for multi-layer paper.
The AGA (automatic gap adjustment) function must be set to On. For more detailed informa-
tion, refer to the Reference Manual on the Online CD-ROM.
Adjust
Paperway
Menu
Char
Online
1
2
3
4
Setup
TOF
Head
Tear
Online
1
2
3
4
Setup
Head= 0
*
Set
<
>
Exit
Online
1
2
3
4
Setup
Negative values decrease the print head gap, positive values increase it.
The setting made will be retained after switching off the printer.
22
Confirm the input by pressing the Set (1) key.
Press the Setup key. The printer returns to the initial status.
Press the Setup key. The printer changes to setup mode.
Press the Adjust (2) key.
Press the Head (1) key.
Use the < (2) or > (3) key to set the range within which the automatic gap ad-
justment is to be corrected. You can select values in the range from -10 to +10.
Confirm the input by pressing the Set (1) key.
Press the Setup key. The printer returns to the initial status.
Quick start-up

Publicidad

Tabla de contenido
loading

Tabla de contenido