Troubleshooting
I can't connect the Keyboard to my iPad.
Try the following in sequence. You can stop when the problem is fixed.
1
Make sure you have installed and set up Bluetooth correctly on your iPad. Check the
documentation that came with your iPad for instructions.
2
Make sure that the Keyboard is within range of your iPad. Maximum Bluetooth range
is about 10 meters/33 feet.
3
If your iPad is connected to other Bluetooth devices, you may need to disconnect
some devices before you can connect to the Keyboard.
4
If you changed any Bluetooth settings on your iPad, try connecting the Keyboard to
your iPad again.
5
Make sure that both your iPad battery and the Keyboard battery are sufficiently
charged.
If this does not solve the problem, please contact Kensington Support at kensington.com.
Technical Support
Technical support is available to all registered users of Kensington products. Technical
Support contact information can be found on the back page of this manual.
Web Support
You may find the answer to your problem in the Frequently Asked Questions (FAQ) section
of the Support area on the Kensington Website: www.support.kensington.com.
Telephone Support
There is no charge for technical support except long-distance charges where applicable.
Please visit www.kensington.com for telephone support hours. In Europe, technical
support is available by telephone Monday to Friday 09:00 to 21:00 (Central European
time).
Please note the following when calling support:
• Call from a phone where you have access to your device.
• Be prepared to provide the following information:
– Name, address, and telephone number
– Name of the Kensington product
– Make and model of your computer
– System software and version
– Symptoms of the problem and what led to them
WARNING! IMPORTANT SAFETY INSTRUCTIONS
Failure to read and follow these safety instructions could result in fire, explosion, electrical
shock or other hazard, causing serious and/or fatal injury and/or property damage.
•
Do not modify, disassemble, open, drop, crush, puncture, or shred the KeyFolio.
•
The KeyFolio contains a lithium-polymer battery, which is flammable. Keep away from open
flame.
•
To prevent short circuit or other potential hazards, prevent metal objects such as coins or keys
from coming into contact with the KeyFolio, and do not insert foreign objects into the KeyFolio or
its ports.
•
Keep your KeyFolio dry, and do not use with wet hands. Moisture in or on the KeyFolio may lead to
electrical shock. If exposed to moisture during use, unplug the KeyFolio immediately. If your
6
KeyFolio gets wet, have a qualified technician evaluate the product's safety before resuming use.
•
Your KeyFolio may become warm during operation. This is normal. However, to prevent
overheating, keep area around KeyFolio ventilated and do not place anything on or around
KeyFolio during operation. Do not operate your KeyFolio near a heat source, heat vent, or in direct
sunlight. Your KeyFolio should be used in temperatures between 50–80°F (10–27°C).
•
If the KeyFolio begins to swell or expand, emits a strong odor, or becomes hot to the touch,
discontinue use of the KeyFolio, and have the product examined by a qualified electronic
technician.
•
Inspect your KeyFolio and cables for damage before use. Have any damaged part repaired or
replaced before use.
•
Your KeyFolio is not user serviceable. Do not attempt to open, modify, or repair.
•
If the battery inside the KeyFolio leaks for any reason, discontinue use, and do not allow the
KeyFolio's contents to contact your skin or eyes. In the event of accidental contact wash the
affected area with large amounts of water and seek medical attention immediately.
•
Your KeyFolio is not a toy. Keep them away from children. Insure that all persons who use this
product read and follow these warnings and instructions.
•
Do not leave the KeyFolio on prolonged charge when not in use.
Enhancing Performance by Proper Care and Storage of your KeyFolio
•
Do not store your KeyFolio either fully charged or discharged. It is best to store your KeyFolio with
at least 30 % charge remaining. To check the charge level of your KeyFolio press the battery
indicator button.
•
Avoid frequent full discharges because this puts additional strain on the battery in the KeyFolio.
Charge your KeyFolio between uses even if it is not fully discharged. The lithium-polymer battery
used in this product has no "memory effect." Therefore, several partial discharges with frequent
recharges are better than one full discharge, and will help prolong the life of your KeyFolio. Short
battery life in laptops is mainly caused by heat, rather than charge/discharge patterns.
•
Do not store your KeyFolio at elevated temperatures (such as in your car) or in high humidity.
Disposing of your KeyFolio
• Do not incinerate or dispose of your KeyFolio in a fire or microwave.
•
Do not dispose of your KeyFolio as ordinary refuse, as it contains a lithium-polymer battery.
Consult your local municipal or civil authority for instructions on correctly disposing of a
lithium-polymer battery.
•
In the USA and Canada: This mark
indicates your KeyFolio can be recycled by the Rechargeable
Battery Recovery Corporation ("RBRC"). When you are ready to dispose of the KeyFolio, please
contact the RBRC at 1-800-8-BATTERY or www.rbrc.org.
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses. and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• R eorient or relocate the receiving antenna.
• I ncrease the separation between the equipment and receiver.
• C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• C onsult the dealer or an experienced radio/TV technician for help.
MODIFICATIONS: Modifications not expressly approved by Kensington may void the user's authority to operate the
device under FCC regulations and must not be made.
SHIELDED CABLES: In order to meet FCC requirements, all connections to equipment using a Kensington input device
should be made using only the shielded cables.
7