Using Rechargeable Batteries - Williams Sound POCKETALKER Pro PKT C1 Manual Y Guia Del Usuario

Using Rechargeable Batteries

The optional Rechargeable Battery
Kit (BAT KT3) helps you operate your
POCKETALKER PRO more economically.
®
Note: The BAT KT3 is only available for
110 VAC mains power (North America).
The kit includes two (2) NiMH AA
rechargeable batteries and a
3V charger.
These batteries are shipped in
a discharged state and must
be charged for 18 hours
before using.
1. Install the two (2) NiMH batteries
according to the steps on page 20.
2. Make sure the POCKETALKER
is turned off.
3. Plug the charger into the charging
jack on the side panel of the
POCKETALKER
4. Plug the charger into a wall
outlet. The indicator light on the
22
PRO
®
PRO.
®
Rechargeable Battery Kit Setup
Charging Jack
Wall Outlet Charger
POCKETALKER PRO will glow red
®
while charging. Batteries should be
fully charged in about 18 hours.
WARNING:
Do not attempt to recharge single-use
batteries!
PKTR PRO
23