Cutting To Length; Termination Kit - Chauvet Professional Epix Flex 20 Manual Del Usuario

Overview
Data/Power
In
Power
This product is powered by an ÉPIX Flex Drive. Refer to the ÉPIX Flex Drive User Manual for detailed instructions on how
to connect this product to power.
Mounting
Before mounting this product, read the
Mounting Diagram
Bracket
ÉPIX Flex 20

Cutting to Length

Each ÉPIX Flex 20 can be cut to length to accommodate custom installations. Any ÉPIX Flex 20 that is cut to length must
be used as the last product linked to an output port of the ÉPIX Flex Drive.
• DO NOT cut across electrical components.
• Any ÉPIX Flex 20 that is cut to length must be used as the last product linked to an output port of
the ÉPIX Flex Drive.

Termination Kit

After cutting an ÉPIX Flex 20 to length, attach the included end cap to the exposed end of the product and seal with the
included silicone glue.
The end cap must be sealed completely to maintain the IP65 rating of the product.
ÉPIX Flex 20 QRG Rev. 1
QUICK REFERENCE GUIDE
Safety Notes. Use 1 of the included brackets every 1.6 ft (0.5 m).
DO NOT Cut Here
Cut
Here
EN
Data/Power
Out
Insert Screws Here
2