Switching On The Appliance; First Use - Rowenta HU5120 Manual Del Usaurio

SWITCHING ON THE APPLIANCE

FIRST USE

1. Lift the water tank, remove the nozzle (3) and unscrew the anti-limescale cartridge support cap (7)
2. Clean the water tank (see CLEANING paragraph) and fill it with cold water (minimum 2 litres / maximum
5.5 litres).
NOTE: We recommend using soft water to avoid experiencing white cloudy water; you can use tap
water, bottled water, distilled water or boiled water but always make sure the water tank is filled with
cold water.
3. Screw the cap back on and make sure there are no water leaks.
4. Make sure the base of the unit is clean and there are no foreign objects.
5. Make sure the water level sensor is free to move.
6.Reposition the tank on the base.
7 . Aim the nozzle so that steam jet is not directed towards an object, which could otherwise affect the hu-
midity control.
8. Wait ten minutes so that the water passes through the anti-limescale cartridge and fills the nebulization
chamber.
9. Plug in the appliance.
10. Start the appliance.
5,5L
max
10min
7