deville C077AP Instrucciones Para La Instalación Y El Uso página 17

- Scrape off with the end of a metallic object
inferior edge of the air intake part to remove the
bistre which has settled there.
These operations have to be made as soon as the
window glass is dirty and it is essential to wait for
the complete extinction of the fire within the
appliance to implement them.
If some local and distinct soot patches (Fig. 11)
appear again and multiply, it is necessary to
dismount the air guide to make a more complete
cleaning (Fig. 12) :
. Hang the door out and lay it down.
. Remove the 3 screws.
. Remove the air guide A and clean it.
. Reassemble the whole and check that the
original window kit is respected.
This operation has to be performed by a skilled
professional.
•
Check the efficiency of the latch of the door and if
necessary make the following adjustments (Fig.
13) :
- Harden the closing of the door:
. Loosen the bolt
. Progressively turn the off-centre hexagonal
shaft
. Give the 2 screws a quarter turn and do it
again if necessary.
. Tighten the bolt
NOTA : This operation increase or decrease the
pressure on the smoke-tight seal of the door of the
appliance.
the
17