Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
using a slow rocking and sweeping motion. For best
performance try to ensure that the teeth are the only
part of the blade in contact with the workpiece.
CAUTION: Take care when setting the tool down
to avoid chipping the tungsten carbide teeth.
Fig.10
"Hammering!"
Fig.11
"Hammering!"
Fig.12
Clearance
each end
When using the Mortar Plunge blades, the cut should
have enough clearance on each end (shown in fig:12),
to ensure that no hammering of the blade ends occurs
(as shown in Fig.13).
7
Fig.13
"Hammering!"
6. MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn the tool off and disconnect tool from the
power source before making any adjustments or
removing/installing attachments or accessories.
Before reconnecting the tool, depress and release the
trigger switch to ensure that the tool is turned off.
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment (including brush
inspection and replacement) should be performed by
an ARBORTECH authorised service center. Always use
identical replacement parts.
1) Motor
Cleaning
CAUTION: Blow dust and grit out of the motor and
switch actuator using clean, dry compressed air is a
necessary regular maintenance procedure. Dust and
grit particles often accumulate on interior surfaces and
can cause premature failure. Not regularly cleaning the
AS175 will affect the tools warranty.
CAUTION: ALWAYS WEAR SAFETY GLASSES
when using or cleaning this tool.
Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. Use a clean,
dry cloth only.
Lubrication
ARBORTECH tools are properly lubricated at the factory
and are ready for use.
Accessories
To reduce the risk of injury, only ARBORTECH,
accessories should be used with this product.
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorised service centre.
Repairs
If you need any assistance in locating any accessory, or
general tool query please contact ARBORTECH.
Publicidad
Tabla de contenido
