Replacing Batteries - Ecom Instruments Lite-Ex KL 10 Instrucciones De Uso

8.3 Replacing batteries
When the brightness is no longer satisfactory,
the batteries should be replaced. It is strongly
recommended that both batteries be replaced
together. When replacing the batteries, only use
approved battery types (see table of approved
battery types in section 7, „Technical data").
To replace the batteries, open the leather case
at the side. After that you can release the battery
compartment cover by turning it anticlockwise
by a quarter of a turn. After you insert the new
batteries (make sure the polarity is correct), clo-
se the battery compartment and check that it is
securely closed. Close the leather case again.
Make sure that torch components are screwed
together securely before switching the torch
on.
Replacing batteries
- Only use approved battery types.
See table in section 7, „Technical data".
- Always replace all of the batteries together.
- Make sure that the polarity of the
inserted batteries is correct.
- Please ensure that all used batteries are
properly disposed of in an environmentally
friendly manner.
- When replacing the batteries, always
check to make sure that the locking
mechanism and seals are clean and in
good condition.
23