NAIM UnitiServe Guia De Inicio Rapido página 2

UnitiServe Quick Start Guide
1 I ns t al li ng, Con nec t ing and Sw itching On
• Install your UnitiServe on an equipment stand or rack intended for the purpose.
power
switch
power input
• Identify the UnitiServe rear panel
standard ethernet cable to connect the
internet connection.
Wired network connection is strongly recommended for the most consistent and secure UnitiServe
operation. Ethernet-over-mains hardware may be used and provides a simple and convenient
method of home network connection. However, the presence of network data on the mains supply
may compromise overall audio system sound quality.
• If your UnitiServe is to be connected directly to a local audio system, connect one of the
Output
sockets (BNC coaxial or TosLink optical) to an audio system digital input.
• Ensure that your network router and peripheral audio equipment is connected, switched on and
working correctly.
• Connect the supplied External Power Supply
to a mains power outlet. Switch on the UnitiServe using the rear panel
• UnitiServe can be controlled via a Flash enabled
the network.
To set up web browser control, open the browser, type the unique "name" of the UnitiServe into the
browser address field and press the "return" key. The UnitiServe name is the last four characters of
the MAC address (excluding the colon separators) printed on the UnitiServe rear panel, preceded
NSSRV
by A typical name would be NSSRV4567. Depending on the web browser, you may need to
type "http://" immediately before the UnitiServe name.
With your UnitiServe connected to the network and its name entered in the web browser, its web
Home
interface menu will be displayed on the computer.
• The UnitiServe interface language can be changed. Select
System Settings,
followed by
Home
selecting the ( ) symbol.
Full installation and operational information can be found in the UnitiServe Reference Manual
included on the CD packed with the product, or available at www.naimaudio.com
digital audio
output (optical)
network
Digital Output, Network
Network socket to a network router with a known working
to the UnitiServe rear panel
web browser
System Setup
Language,
and the desired option. Return to the Home menu by
digital audio
output (coaxial)
Power Input
and sockets. Use a
Power Input socket and
Power Switch.
running on a computer connected to
from the Home
Note:
Ensure that the unit
has adequate ventilation. The
ambient temperature in the
vicinity of the unit should not
exceed 35°C.
Note:
UnitiServe is configured
when shipped not to require
any network setup but
to connect to a network
automatically. However, if
Digital
your UnitiServe has been
previously used, its network
configuration may have been
altered, leaving it unable to
connect automatically. Refer
to the Reference Manual or
contact your retailer if this
appears to be the case.
Note:
Alternative UnitiServe
control interfaces, such as
a remote handset or mouse
and VGA screen, a USB/VGA
touch screen, the Naim DTC
windows application, or iPad,
iPhone or iPod touch apps are
described in the Reference
Manual.
menu,
English