Service Centre - Max 26197 Manual De Instrucciones

There are two safety-related switches on the
tool: main switch (trigger) and safety contact
(� gure 1).
Follow instructions for safe use:
1. Connect tool to mains.
2. Switch on at mains.
3. Place tool where staple/tack is to be
inserted.
4. Press tool against item to activate safety
contact.
5. Press trigger.
Figure 1
Safety contact
Loading and removal of jammed staples/
tacks
1. Press Open/lock switch to release
magazine. Extract magazine from tool.
2. Pull spring back. Load a strip of staples or
tacks in magazine.
3. Follow instructions 1 & 2 for jammed
staples/tacks.
22
Trigger
Open/lock
switch
Cleaning
Wipe with a dry cloth. Do not use liquids.
Accessories
Suitable for staples and tacks from 8-16 mm.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 8.00 to 16.00
(Fridays until 15.30)
• E-mail: service@schou.com