Setting The Timer; Setting The Time, Date, Dst - Grundfos Digital timer kit Instrucciones De Instalación Y Operación

5. Setting the timer

DANGER
Electric shock
Death or serious personal injury
- Do not plug this timer into an
extension cord.
- Always plug the 3-prong plug
directly into a properly grounded
outlet. Never attempt to defeat this
safety feature.
- Do not use the timer to control
devices that could have dangerous
consequences due to inaccurate
timing, such as sun lamps, sauna,
heaters, and crock pots.
- Follow all local electrical codes
during use.
There are no user serviceable parts
inside.
Before initial use, plug the timer into
an AC outlet for at least 30 minutes to
charge the internal battery. If the
display is not visible, press [RESET]
to restart the timer and erase all
settings and events. You may unplug
the timer from the AC outlet for easier
setting.
Fig. 1 Timer
6

5.1 Setting the time, date, DST

(Daylight Saving Time), and region
When setting the timer, if you pause
for more than 30 seconds, the timer
will automatically return to normal time
of day display.
1. Press [TIME]. A flashing
4-digit year appears.
2. Press [+] or [-] to set the
current year and then
press [TIME].
3. Press [+] or [-] to set the
month ("01"=Jan,
"12"=Dec) and then
press [TIME].
4. Press [+] or [-] to set the
day of the month.
5. Press [TIME] to set
"DST" (Daylight Saving
Time) function.
6. Press [+] or [-] to select
"AUTO" (AUTO DST
adjust enabled) or "OFF"
(DST disabled).
NOTE: DST enables the
timer to automatically
move ahead 1 hour on
the second Sunday in
March at 02:00 AM and
then automatically adjust
back 1 hour on the first
Sunday in November at
02:00 AM.
7. Press [TIME]. The hour
digit flashes.
8. Press [+] or [-] to set the
current hour, then press
[TIME]. The minute digit
flashes.
9. Press [+] or [-] to set the
minute, then press
[TIME].
10. Press [+] or [-] to set
your current zone. The
map below will determine
what zone the timer is
being used in. Once the
zone is selected, the
timer will automatically
set the sunrise and
sunset time.