Equipment Description - AKO -522044 Manual Del Usario

3.- Equipment description

Alarm station
VISUAL ALARM
INPUT INDICATORS
INPUT IDENTIFICATION LABEL
MODBUS ADDRESS SELECTOR
PRE-ALARM JUMPER
Input identification label
We recommend filling in the input identification label included with the station
to optimise alarm origin identification.
Luminous button
In stand-by, the button's luminous indicator will
be permanently on even though the power
supply fails, as long as the battery is not flat.
Press the button to activate the alarm, and to
deactivate it turn the button clockwise until it is
released.
Gas detector
Delay switch
It delays the activation of alarms detected in
the station.
The detector status indicators will indicate the
alarms and pre-alarms immediately, without
taking into account the delays.
Without delay*
60 sec.
IMPORTANT: The delay configuration should be carried out with the station's power supply
disconnected, as if not it will not work.
ALARMS
1
2
3
4
1 2 3 4
LUMINOUS BUTTON
ALARM BUTTON
STATUS INDICATORS
30 sec.
DELAY SWITCH
120 sec.
* Default value
14
POWER SUPPLY STATUS
MUTE/RESET BUTTON
ACOUSTIC ALARM
AUTO-CONFIGURATION
BUTTON
ALARMS
Compressor
1
room
Cold
2
room 1
Workshop
3
4
1 2 3 4