How To Use This Manual; Included In The Box; Required For Installation - Heatworks 1X Guía De Instalación Y Manual Del Usuario

2

HOW TO USE THIS MANUAL

Please proceed with installation of your MODEL 1X by
following the steps in the sequence they are presented.
Throughout this manual, we have highlighted certain
points that require special attention. These points are
indicated by the three BOLDED categories below:
• "IMPORTANT" Commonly missed step in installation.
• "CAUTION" Negligence of this step could result in
damage to your MODEL 1X or personal injury.
• "HEATWORKS RECOMMENDS" The user or installer
should be aware of these additional notes and benefits.

INCLUDED IN THE BOX:

1 MODEL 1X Water Heater
1 MODEL 1X Water Heater Installation & User Manual
2 mounting brackets
4 mounting bracket screws
2 zip ties
3 ferrules
Tie wrap
Tank power wire extension
2
®

REQUIRED FOR INSTALLATION

Ferrule crimper tool
Designated 240 V, 30 A circuit installed by a
licensed electrician
One (1) 3/4" or 20 mm temperature and pressure
(T&P) relief valve rated at 150 psi (10.3 bar) and
210°F (99° C)
One (1) 18" minimum flexible water heater connection
hose for the T&P relief valve outlet connection
One (1) 18" minimum 3/4" push-fit flexible water
heater connection hose for the inlet connection
HEATWORKS RECOMMENDS: For ease of installation,
install one push-fit flexible water heater connection
hose on the inlet of the unit and one threaded flexible
water heater connection hose on the T&P relief valve. If
connecting directly to copper piping, 3/4" or 22 mm
push-fit connectors can be used at the inlet connection.
Flat mounting surface (ie. a wall) - DO NOT SECURE
THE MODEL 1X TO PIPING
ADDITIONAL HELPFUL MATERIALS
Drywall anchors, plywood or stud finder to ensure
brackets will support the MODEL 1X
Level to ensure mounting brackets are level before
MODEL 1X is secured with zip ties
YOU ARE NOW READY TO BEGIN INSTALLING YOUR
HEATWORKS MODEL 1X
Please continue to page 3
CAUTION: Breaker must remain off until installation is complete.