Alpine SEC-100S Manual De Operación página 60

EXT2 (Press and Release):
EXT3 (Press and Hold):
MODE (Press and Release):
Silent Arm/Disarm - Allows silent arming/
disarming of the security system. Press
the MODE button followed by TX to
silently arm/disarm the system.
Alarm Silence - Stops the siren from
alarming without disarming the security
system and unlocking the doors. Press
the MODE button during the alarming
mode to silence the alarm.
Car Finder - Chirps the siren and flashes
the lights five times so that you can find
your vehicle in a crowded parking lot.
Press the MODE button twice while the
security system is armed to start the car
finder feature.
Serial Number / Numéro de série / Número de serie:
Installation Date / Date d'installation / Fecha de instalación:
Installation Technician / Installateur / Instalador:
Alpine Authorized Dealer / Lieu d'achat / Lugar de adquisición:
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place
Torrance, California 90501 U.S.A.
Tel.: (310) 326-8000
ALPINE ELECTRONICS OF CANADA, INC.
7300 Warden Avenue, Suite 203
Markham, Ontario L3R 9Z6 Canada
Tel.: (905) 475-7280
Remote Control Quick Reference
Battery Type: 12V Alkaline #MN21, GP23A or VR22
Transmitter Type: 433 MHz Radio Frequency SAW Resonator
Alpine proprietary Random Code IC
5,300 trillion
ALPINE ELECTRONICS, INC.
Tokyo office: 1-1-8 Nishi Gotanda
Shinagawa-ku, Tokyo 141, Japan
Tel.: (03) 3494-1101
http://www.alpine-usa.com
EXT1 (Press and Release):
VALET (Press and Hold):
Places the system in a protected valet
mode which disables the security
system except for the hood/trunk
zones, which continue to be monitored
while you leave your car with a valet
parking attendant, for example.
TX (Press and Release):
Arms or disarms the security system.
In valet mode, locks or unlocks the
doors (if so connected). Pressing
MODE before pressing the TX button
allows the system to be armed or
disarmed silently.
PANIC (Press and Hold):
Places the system in full-alarm mode by
sounding the siren for 30 (or 60)
seconds to attract attention to the
vehicle. Press TX again to stop the
panic mode.
3
possible code combinations