Bulb Replacement - Craftmade Toscona TO52 Instrucciones De Instalación

8
1. Connect fan wires to ceiling wires: white fan wire to white outlet wire,
black to black and green to green. Wire connectors (S6) are provided for
your convenience. If an additional blue wire is present then also connect
the blue wire to the black wire. (Optional light kit may be wired to
individual wall switches, if desired.)
2. After connections
Ground
are made, turn
splices upward
White (Neutral)
and push carefully
into outlet box.
Black (Power)
Separate blue and
black wires on one
side of the box, and
white and green wires
on the other side.
White
Black
There are 4 colored
wires coming from the
top of the motor
(including ground wire).
Wire Connnections
Outlet Box Fan wires
Black Black
(Hot wire for fan)
Green Green
(Ground wire)
White White
(Neutral wire)
Black Blue
(Light kit wire)
Step 8
Blue
Outlet Box
Ground (Green)
Downrod Ground
(Green)
Mounting Bracket
Ground (Green)
9
Attach canopy (#3) to the
mounting bracket by placing
screws (S2) into slot in canopy.
Twist clockwise to lock
into place. Tighten screws
firmly.
Wire
Connectors
(S6)
Ground
(Green)
10
Carefully remove small screws holding vent cover from top of motor
housing unit. Lift vented bulb access cover. Replace bulb. Replace cover
and small vent screws.
Step 9

Bulb Replacement

Ceiling
Canopy (3)
Screws (S2)
Bottom of Canopy
Vent Screws
Vented Access Cover
Motor Housing (7)