Maintenance And Repairs; Cleaning - Sagola PACK 6000X Manual De Instrucciones, Lista De Repuestos

Before starting, check the condition of the air hose
as well as the connections of the components
through which the air flows.
To perform maintenance or repair work, previously
disconnect the equipment from the compressed
air grid and the mains and depressurise it.
Maintenance and repair tasks on the equipment
may only be done by personnel authorised by
SAGOLA, S.A.
Due to its construction and design the equipment
does not require any regular maintenance.
A qualified specialist is also required to change the
factory "default" settings, when so required.
Is it compulsory to use gloves that are heat
resistant to 200ºC for handling the equipment,
even though you may work at lower temperatures,
Regularly clean the equipment, especially the pilot
lights and the protective cover of the control keys.
Keep them sufficiently visible.

11. MAINTENANCE AND REPAIRS

12. CLEANING

to ensure the health and safety of the operator in
the event of an eventual malfunction of the tempe-
rature sensor.
FOR ALL THESE CASES WE RECOMMEND
THE INTERVENTION OF SAGOLA S.A.'s
TECHNICAL ASSISTANCE SERVICE (TAS)
SAGOLA S.A. reserves itself the right to not
authorise the performance of certain tasks on the
equipment.
It is essential to perform a regular review of the
equipment to verify the condition of its compo-
nents and replace these when they are not in
perfect condition.
TO OBTAIN THE BEST POSSIBLE RESULTS
ALWAYS USE ORIGINAL SAGOLA SPARE
PARTS.
Keep free of foreign objects the air passage closure
areas.
Do not use hard or sharp objects.
- 24 -