Safety And Installation Instructions - Dometic Heki 3 Plus Instrucciones De Montaje Y De Uso

Heki 3 Plus
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2

Safety and installation instructions

Please observe the prescribed safety instructions and stipulations
from the vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the
manufacturer
 Use for purposes other than those described in the operating manual
NOTE
I
If you do not have sufficient technical knowledge for installing the
components in vehicles, you should have a specialist install the
roof window in your vehicle.
Please note the following:
 If faults or disturbances occur, consult a specialist workshop immediately.
 Risk of breakage! Do not tread on the glass dome.
 Before starting your journey, check that the roof window is locked
properly.
 Before starting your journey, check the roof window for damage (such as
tension cracks in the acrylic glass).
 Do not open the roof window while driving.
 Do not open the window in strong wind or rain.
 Close the roof window if it rains or snows.
 Do not leave the vehicle with the roof window open.
 Keep the roof window free of snow and ice.
 The electrical connections should only be performed by an electrician.
EN
Safety and installation instructions
15