Function Instruction; Storage Instructions; Shelf Instructions - Danby Designer DWC114BLSDD Manual Del Propietário

OPERATING INSTRUCTIONS

FUNCTION INSTRUCTION

When the appliance is plugged in for the fi rst time,
the default temperature setting is 54°F (12°C). The
default temperature scale is °F.
To switch the display between °F and °C, depress
the upper and lower temperature buttons
simultaneously for approximately 3-5 seconds.
The temperature can be set as low as 41°F (5°C) or
as high as 64°F (18°C).
Actual temperature inside the appliance can vary
based on ambient temperature, how often the
door is opened and how many warm bottles have
recently been added to the appliance.
Each depression of the upper or lower temperature
button will lower the temperature of that zone in 1°
increments.
Door Ajar Alarm: If the door is not closed
completely for 5 minutes, an alarm will sound. Close
the door to silence the alarm.
If the door is closed and the alarm continues to
sound, check that the actuator at the bottom of
the door is making contact with the switch on the
appliance.
Temperature Memory: If the appliance loses power,
the control panel will remember the set temperature.
Once power is restored, the appliance will return to
normal functioning automatically.
Temperature Alarm: If the inner cabinet temperature
is higher than 73°F (23°C) for one hour, the error
code "HI" will show on the display panel and an
alarm will sound.
If the inner cabinet temperature is lower than 32°F
(0°C) the error code "LO" will show on the display
panel and an alarm will sound.
If the inner cabinet temperature remains at 32°F
(0°C) the error code "CL" will show on the display
panel and an alarm will sound. The appliance
will stop functioning to prevent the contents from
freezing.

STORAGE INSTRUCTIONS

The maximum capacity of this appliance is 38 wine
bottles of 750 ml size.
Position wine bottles alternately (head-to-tail) on
each of the upper 4 shelves. This will allow storage
of 7 bottles per shelf. See fi gure A.
Position 5 wine bottles on the bottom two shelves.
See fi gure B.
A

SHELF INSTRUCTIONS

Do not cover shelves with aluminum foil or any
other material as this will impede air fl ow inside the
cabinet and can adversely affect the interior cabinet
temperature.
1. To remove a shelf, tilt up one side and pull
outward.
2. To replace a shelf, ensure it is resting securely
on the support brackets and push inward until it
locks into place.
6
B