Intended Purpose; Equipment Components; Items Supplied; Technical Data - Parkside PABS 12 B2 Instrucciones De Utilización Y De Seguridad

Introduction
Cordless drill PABS 12 B2
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Intended purpose

This appliance is designed for drilling and screwing
into wood, plastic and metal. Use the appliance only
as described and only for the purposes indicated.
Any other uses, and modifications to the appliance,
are deemed to be improper usage and may result
in serious physical injury. The manufacturer accepts
no responsibility for damage(s) resulting from
improper usage. The appliance is not intended for
commercial use.

Equipment Components

Gear selector switch
1
Rechargeable battery LED (status indication)
2
Direction of rotation switch / lock
3
ON / OFF switch
4
Soft-grip
5
Battery pack
6
Battery release button
7
Light
8
Torque control / drill step
9
Quick-action drill chuck
10
Bit
11
Red charge indicator
12
Green charge indicator
13
Charger
14
36 GB/MT

Items supplied

1 Cordless drill PABS 12 B2
1 Rechargeable battery pack PABS 12 B2-1
1 Fast charger PABS 12 B2-2
2 Bits (S2 PZ1, S2 PZ2)
1 Carry case
1 Directions for use

Technical Data

Cordless Drill PABS 12 B2:
Nominal voltage:
Idle-running speed:
Drill chuck
clamping range:
Maximum
drill diameter:
Steel:
Wood:
Battery pack PABS 12 B2-1:
Type:
Nom. voltage:
Capacity:
PABS 12 B2-2 Fast Charger:
INPUT
Nominal voltage:
Nominal power:
OUTPUT
Nominal voltage:
Charging current
Charging time:
Protection class:
Noise / vibration data:
Measured values for noise are determined in accord-
ance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level
Sound power level : 78 dB(A)
Uncertainty K:
12 V
1st gear: 0–350 min
-1
2nd gear: 0–1300 min
max. 10 mm
8 mm
20 mm
LITHIUM-ION
12 V
2000 mAh
230–240 V∼ 50 Hz
38 W
12.6 V
2400 mA
approx. 60 min
II /
: 67dB(A)
3 dB
-1