Troubleshooting - Hamilton Beach 34102 Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

840210600 ENv03.qxd:Layout 1

Troubleshooting

PROBLEM
PROBABLE CAUSE
Cooktop does not
• LOCK has been set. Make sure cooktop is unlocked.
work after being
• Buttons are being pressed too hard—they only need to be touched to operate.
turned on.
• Cooktop not plugged in. Plug cooktop into wall outlet. Repeat start process in "Using the Cooktop"
• Cookware not in center of cooking zone.
Control panel does
• LOCK has been set. Make sure cooktop is unlocked.
not work when
buttons are pressed.
Cooktop keeps
• Cookware not induction-compatible. Make sure to use compatible cookware. See "Selecting the Right
beeping.
Error code E0, E4,
• Cooktop is defective. Do not attempt to repair. Contact Customer Service at 800-851-8900.
E5, E7, or E8 when
cooktop display
flashes an Error
Code.
Error code E1 when
• Blocked airflow. Cooktop must be at least 1-inch (2.5 cm) away from wall or other obstructions.
cooktop display
flashes an Error
Code.
Error code E2 or E3
• There may be too many appliances in the same outlet. Plug into wall outlet with no other appliances.
when cooktop
display flashes an
Error Code.
Error code E6 when
• Cookware heated too long. Remove cookware to cool. Repeat start process in "Using the Cooktop"
cooktop is turned off.
10
12/19/11
9:19 AM
Page 10
section on page 6.
Cookware" section on page 5.
section on page 6.

Publicidad

Tabla de contenido
loading

Tabla de contenido