Publicidad
Recommend DIMM Module Combination
1.
One DDRIII Memory Module ----Plug in XMM1
2.
Two DDRIII Memory Modules---Plug in XMM1 and XMM2 for Dual channel function
Dual channel Limited!
1. Dual channel function only supports when 2 DDRIII Modules plug in both XMM1 &
XMM2.
2. Memory modules plugged in XMM1 & XMM2 must be of the same type, same size, and
same frequency for dual channel function.
Install DDRIII modules to your motherboard is not difficult, you can refer to figure
below to see how to install a 240-Pin DDRIII800/DDRIII1066/DDRIII1333 module.
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab should be
locked into the DIMM module very firmly and fit into its indention on both sides.
Expansion Cards
Procedure For Expansion Card Installation
1. Read the documentation for your expansion card and make any necessary
hardware or software setting for your expansion card such as jumpers.
2. Remove your computer's cover and the bracket plate on the slot you intend to use.
3. Align the card's connectors and press firmly.
4. Secure the card on the slot with the screen you remove above.
5. Replace the computer system's cover.
6. Set up the BIOS if necessary.
7. Install the necessary software driver for your expansion card.
：
X M M 1 & X M M 2:
D u a l C h a n n e l
Publicidad
