Publicidad
(14) FRONT PANEL : F_PANEL
This 9-pin connector included Power LED, IDE Activity LED, Reset Switch,
Power Switch:
1. Power LED
The Power LED is light on while the system power is on. Connect the Power
LED from the system case to thess 2 pins (FP_LED+ , FP_LED-). Light
indication as next:
S0: LED on
S1/S3: LED blinking
S4/S5: LED off
2. IDE Activity LED
This 2-pins connector (HD_LED+ , HD_LED#) showing the hard disk activity
indicator light on the case
3. Reset Switch
This 2-pin connector (SYS_Reset# , Ground) connects to the case-mounted
reset switch for rebooting your computer without having to turn off your
power switch. This is a preferred method of rebooting in order to prolong
the lift of the system's power supply.
4. Power Switch
This 2-pin connector (PWRBTN# , Ground) connects to the case-mounted
power switch to power ON/OFF the system
Publicidad
