Schwinn Fitness 460 Instrucciones Para El Montaje página 8

Step 3: Console Mast
Parts
• Assembly from Step 2
• #7 - Console Mast (Qty 1)
Hardware
• #24 - M8 x 20 Button Head Bolt (Qty 4)
• #27 - M8 Spring Lock Washer (Qty 4)
• #28 - M8 Flat Washer (Qty 4)
Tools
• 6mm Hex Key
Assembly
7
24
27
28
Assembly Manual
Note: This step requires two people.
3-1 Have one person hold the Console Mast in place
while the other person connects the Main Console
wire (W1) to the the Main Assembly wire (W2).
3-2 Set the Console Mast on the Main Assembly and
line up the bolt holes.
NOTICE: Do not pinch the wires when putting the
Console Mast on the Main Unit.
3-3 Attach the Console Mast to the Main Assembly with
the hardware shown.
3-4 Tighten the hardware.
W1
W2
Figure 3
6