Sennheiser EKI 1029 Instrucciones Para El Uso página 5

Models
Type: EKI 1029-7
EKI 1029-12
EKI 1029 PLL-16
EKI 1029 PLL-32
Headphone socket
Socket serves to connect magnetic or dynamic mono headphones. For suitable headphones please see
"ACCESSORIES".
Connection
Socket: 3.5 mm for mono jack plug, max. output voltage: 0.9 Vrms / 200 Ω.
Attachment
Use the clip at the rear of the unit to attach the receiver to your clothing. Make sure that diode
covered. It is also possible to lay the receiver on a table (with the diode up).
Putting the EKI 1029 to work
The receiver is switched on automatically after the headphone has been plugged into socket
channel using switch
Charging method
The portable charging unit L 1029-75 serves to recharge the batteries after the receiver has been used.
Accessories
(to be ordered separately)
HD 410 D (Art. No. 02146)
HD 1019 (Art. No. 03985)
TC 2-26 (Art. No. 05115)
TC 2-36 (Art. No. 05116)
L 1029-75 (Art. No. 03371)
L 1029-75 UK (Art. No. 03543)
L 1029-75 120 (Art. No. 03544)
Technical Data
Modulation
Carrier frequencies
Frequency range
Terminating impedance
Headphone socket
Power supply
Operating time
S / N ratio
Weight
Subject to alterations.
03475
03252
03627
04623
(EKI 1029 PLL-32:
open-type headphone with silicone earpads
open-type headphone with foam earpads
lightweight stethoscopic headphone
stethoscopic headphone with foam earpads
charging unit and system case (230 V)
charging unit and system case (UK)
charging unit and system case (120 V)
FM
55 - 1335 kHz
50 - 8,000 Hz
25 Ω - 2000 Ω
3.5 mm, mono, automatic on/off function
rechargeable batteries; 2.5 V / 170 mAh
approx. 30 hrs
> 52 dB(A)
approx. 100 g
(7 channels, yellow volume control)
(12 channels, grey volume control)
(16 channels, blue volume control)
(32 channels, blue volume control)
+ ). Adjust the volume with volume control
is not
. Select a
.
5