Parts List; Key To Symbols; Worn-Out Products - Sundstrom SR 500 Instrucciones De Uso

• To release the particle filter SR 510 from the gas
filter, proceed as follows:
• Grip the gas filter with one hand.
• Insert a coin or some other flat object, e.g. the
filter adapter, in the joint between the particle
and gas filters.
• Then prise out the filter. Fig. 27.
Fit new filters/combined filters. See 2.5 d).
4.4.3 To change the gaskets
The gaskets in the filter mountings of the fan unit
prevent polluted air being drawn into the fan unit. They
must be changed once a year or more frequently if
wear or ageing is detected. Proceed as follows:
• Switch off the fan unit.
• Screw out the filters.
• The gasket has a groove all round and is fitted on a
flange below the threads in the filter mounting. Fig.
28.
• Remove the old gasket.
• Fit the new gasket onto the flange. Check that the
gasket is in place all round.
4.4.4 To change the belt
See 2.5 b)

5. Parts list

The numerals below refer to Fig. 1. at the end of the
user instructions.
Item
No. Part
1. Hood SR 561
2. Hood SR 562
3. Hood SR 520 M/L
3. Hood SR 520 S/M
4. Hood SR 530
5. Face shield SR 540
6. Full face mask SR 200, PC visor
6. Full face mask SR 200, glass visor
7. Welding shield SR 590
8. PU hose SR 550
8. Rubber hose SR 551
9. Helmet with Visor SR 580
10. O-ring
11. Flat gasket
12. Flow meter SR 356
13. Steel net disc SR 336
14. Asbestos kit
15. Storage bag SR 505
16. STD Standard battery, 2.2 Ah
16. HD battery, 3.6 Ah
17. Battery charger SR 513
18. Belt PES SR 508
18. Rubber belt SR 503
19. Leather belt SR 504
20. Fan SR 500, bare
21. Gasket
22. Pre-filter holder SR 512
23. Pre-filter SR 221
24. Particle filter P3 R, SR 510
25. Filter adapter SR 511
26. Pre-filter holder SR 5153
27. Particle filter P3 R, SR 710
28. Gas filter A2, SR 518
29. Gas filter ABE1, SR 515
40
30. Gas filter A1BE2K1, SR 597
31. Combined filter

6. Key to symbols

7. Worn-out products

The fan unit contains a circuit board with electronic
components, a small proportion of which comprise
toxic substances. The battery contains no mercury,
cadmium or lead, and is therefore not regarded as
environmentally harmful waste. For proper handling,
collection and recycling, worn-out fans should be
handed in to a recycling centre, where they are
accepted free of charge. In some countries, you may
hand in your products as an alternative to the sales
Ordering No.
outlet if a new equivalent product is bought. If you
H06-5012
handle the disposal correctly, valuable resources will
H06-5112
H06-0212 be saved and possibly negative effects on human
H06-0312
health will be prevented. Contact the local authorities
H06-0412
for information on the location of your nearest
H06-0512
recycling centre. Unsatisfactory disposal of these
H01-1212
products may be punishable by a fine.
H01-1312
H09-4012
8. Approvals
T01-1216
T01-1218
• The SR 500 in combination with face shield
H06-8012
SR 540, welding shield SR 590, helmet with Visor
R06-0202
SR 580, hoods SR 520, SR 530, SR 561 or SR 562
R06-0506
is approved in accordance with EN 12941:1998,
R03-0346
class TH3.
T01-2001
• The SR 500 in combination with full face mask SR
T06-0105
200 is approved in accordance with
T06-0102
EN 12942:1998, class TM3.
R06-0102
• The SR 500 conforms to the requirements of
T06-0101
R06-0103
EN 50081-1 Emission and EN 61000-6-2 Immunity,
R06-0101
which makes the fan conform to EMC Directive
T06-0104
89/336/EEC.
T06-0103
R06-0110
The EC type approval certificate has been issued by
R06-0107
Notified Body No. 0194.
R06-0106
For address, see back-cover.
H02-0312
H02-1312
Australian StandardsMark
R06-0105
R01-0604
The fan SR 500 is tested and certified to comply to
H02-1512
AS/NZS 1716:2012. The StandardsMark is issued
H02-7012
under licence by SAI Global Certification Services Pty
H02-7112
Limited Lic No.766 (ACN 108 716 669) ("SAI Global").
A1BE2K1-Hg-P3 R, SR 599
Recycling symbol
See user instructions
Not with ordinary waste
CE approved by
INSPEC Certification Services Ltd.
Insulation class 2
H02-7212
H02-7312