PARTS DESCRIPTION
1. Charging LCD screen
2. On/Off switch
3. Removable rechargeable battery
4. Dirt container
5. Dust � lter
6. Dirt container release button
7. Floor head (electric brush)
8. Crevice tool
9. Tube
10. HEPA � lter (inside dust � lter)
BEFORE THE FIRST USE
Installation of the appliance
•
Take the appliance and accessories out
the box. Remove the stickers, protective
foil or plastic from the device.
•
Insert the removable battery into the rear
of the vacuum cleaner unit.
•
Insert one end of the tube into the � oor
head and the other end into the vacuum
cleaner.
Charge
•
Plug the charging adapter into the
vacuum cleaner battery and the power
outlet.
•
The charging LCD screen will start to
illuminate.
•
Fully charge the vacuum cleaner battery
before � rst use.
•
It will take about 5 hours to fully charge
the battery.
•
All three led lights of the LCD screen will
stay on once the battery is fully charged.
•
The adapter may become warm during
charging. This is normal.
USE
•
You should regularly check that the
nozzle cushions and the brush roller
are clean in order to avoid scratching
sensitive � oors.
•
Hold the handle and push the switch to
turn the vacuum cleaner on.
•
The device will not start if the charging
adapter is connected to the wall socket.
•
Press the switch one time to turn the
device on, press the switch two times for
more power, pushing it one more time to
turn off .
•
The crevice nozzle can be � tted in order
to reach awkward places.
GB
15