Publicidad
Idiomas disponibles
Idiomas disponibles
User's manual and safety instructions of the unique, patented
Ruby Fires Ceramic Burner a product by Ruby Decor B.V., The Netherlands
Keep this user's manual carefully for the life of this product. This product is only to be sold in combination with this user's
manual.
Please read the instructions below thoroughly before putting your Ruby Fires ceramic burner to use. Make sure that the guidelines as
provided are followed.
The Ruby Fires ceramic burner can only be used by people of age, who are competent and who have read and understood these
user's manual and safety instructions.
Installation of the ceramic burner:
• The ceramic burner is to be placed or hung on a heat resistant foundation or wall.
• When attaching to a wall, we advise to keep a safety distance of minimum 1 cm from the wall in order to ensure a natural fl ow of air.
• Never remove the isolation layer on the backside. Risk of fi re!
• Make sure that during installation the ceramic burner is levelled, both horizontally and vertically. This to make sure that liquid cannot
fl ow out of the burner.
• Keep a safety distance of at least 1 meter (on left-, right- and front side) to objects. Keep fl ammable objects (e.g. curtains, furniture or
bookshelves) away from the Ceramic Burner.
• Do not place the ceramic burner next to, underneath or on top of a windowsill. Risk of fi re!
• Use the ceramic burner only in a draft-free room, otherwise soot can be a result. However, it is important to have suffi cient ventilation.
• Ruby Fires delivers its own unique fuel: Ruby Fires bio ethanol 98% called LEF. The ceramic burner can only function optimally in
combination with this Ruby Fires bio ethanol 98%. Never use another liquid or gel to fi ll or refi ll the ceramic burner: this may cause
blockage of or damage to the ceramic element on the inside of the burner , resulting in fl ames of poor quality. As a consequence, the
warranty expires as well. Exceptions need to be agreed upon by Ruby Fires.
Installation in a Ruby Fires surround:
• Place the ceramic burner in the insert (make sure this is levelled)
Installation in an existing fi replace:
• Place the Ceramic burner in the therefore appointed space (make sure this is levelled) Minimum distance necessary above top of the
burner: 50 cm. Risk of fi re!
Installation of the enclosed glass screens:
• We advise you to use the enclosed glass screens. The glass plates can be installed on the burner with the torques supplied with the
burner. This prevents the fl ames to hit the back (see pictures below). Contact your dealer if fl ames keep on hitting the back.
Installation of the logset/pebbles:
• Ruby Fires has developed a special ceramic log set and pebbles for decoration purposes of the ceramic burner. Place these around
the fi re opening (the (white) ceramic element) of the burner. The fi re opening should remain free. When decoration material is placed
into the fl ames, unnecessary soot will be formed and an unsafe situation may arise. Do not touch decoration material until it has
cooled down for at least 30 minutes. Risk of burns!
• For safety reasons never use any other decoration material for the ceramic burner except the original Ruby Fires ceramic log set or
pebbles. Risk of fi re!
• When placing a ceramic burner against a back wall (e.g. (wall)surround), make sure the fl ames burn vertically at all times. This by
using glass, log set, pebbles or a spoiler. In case the fl ames do hit the back, extinguish the fi re immediately and contact your supplier!
Check our website for different examples.
Publicidad
