Warner Stride Lite Manual De Ensamblaje Y Instrucciones página 2

DANGER: The Stride Lite™ Stilts are made of
aluminum alloy that conducts electricity. Always
use extreme caution when working around any
electrical sources as electric shock may cause
severe injury or death.
WARNING:
operator to have knowledge of all regulations that
apply to the use of this product and the employer
should provide training.
1. The operator must read and understand all instructions
before using.
2. Stilts must be assembled and adjusted properly following
this manual.
3. The operator must examine stilts for loose, broken or
missing parts prior to each use. Stilts must be maintained
and cleaned daily.
4. Stilts must not be modified. Never make temporary repairs
of damaged or missing parts.
5. The operator must keep work area clean and be aware of
all hazards.
6. Always think about safety and use extreme care when
on stilts.
7. The operator must never use on or near stairs, doors,
windows, floor openings or other hazards.
8. Always take controlled, thoughtful steps looking ahead.
9. Never walk BACKWARDS.
10. Never walk on raised surfaces such as planks and scaffold-
ing or up on benches or ladders.
11. Never exceed maximum weight limit of 230 lbs., including
tools and materials.
Failure to follow these warnings may
cause injury or death from falling.
If you have any questions about your Stride Lite™ stilts, please
contact us before use.
WARNER TOOL PRODUCTS 1-800-444-0606
Federal OSHA regulations require the
2