Tools Needed For Assembly - Warner Stride Lite Manual De Ensamblaje Y Instrucciones

ASSEMBLE YOUR STILTS

Tools Needed for Assembly

7/16" Open or Boxed End Wrench
7/16" Socket and Ratchet
#2 Phillips Screwdriver
Review the Replacement Parts
Diagram (pg. 10) to become
familiar with all stilt parts before
assembling.
Assembling Side Poles
1. Loosen Upper Side Pole
Clamp Bolt.
2. Loosen Lower Side Pole
Bracket and remove bolt
(making sure not to lose
washers).
3. Insert Lower Side Pole
through the Upper Side
Pole Clamp, then insert
it into the Lower Side
Pole Bracket. Lining
up the holes, carefully
reinsert the bolt with
washer through both the
bracket and pole. Add
the second washer and
tighten the nut. Lift the
pole to make sure it is
attached properly.
4. Slide the Upper Side Pole
over the Lower Side Pole
and into the Upper Side
Pole Clamp. Snug the
bolt so the pole will not fall
but can be moved and twisted.
Upper
Side Pole
Upper Side
Pole Bracket
Upper Side
Pole Clamp
Lower
Side Pole
Lower Side
Pole Bracket
3
Leg
Support Cuff
Wing Bolt