Recording On A Cassette Tape - Sharp CD-MPX870 Manual De Manejo

Various tape functions
Function Main unit Remote
control
Playback
Stop
Fast
forward/
Rewind
(TAPE 2
only)
Caution:
To remove the cassette, press the
open the compartment.
Before changing from one tape operation to another, press the
(TAPE ) button.
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.

Recording on a cassette tape

Before recording:
When recording important selections, make a preliminary test to
Operation
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
Press in the stop
from malfunction of this unit.
mode.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
Press in the playback,
For recording, use only normal tapes. Do not use metal or
fast forward or rewind
CrO tapes.
mode.
Erase-prevention tab of cassette tapes:
Press in the playback
or stop mode. When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
(TAPE ) button, and then
03/12/19
Side A
Tab for side B Tab for side A
CD-MPX870 25-32.fm
CD-MPX870
CD-MPX870W
ENGLISH
E-30