Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Technical Specifications
Battery
Voltage
Speed
Weight
Max Torque
WARNING: Before using this
tool or any of its accessories,
read this manual and follow all
Safety
Rules
Instructions.
precautions,
instructions appearing in this
manual are not meant to cover all
possible situations. It must be
understood that common sense
and caution are factors which
cannot be built into the product.
EYE, EAR & LUNG PROTECTION
ALWAYS
PROTECTION
CONFORMS WITH CSA REQUIREMENTS
or ANSI SAFETY STANDARD Z87.1.
FLYING
DEBRIS
permanent eye damage.
. Prescription eyeglasses ARE
NOT a replacement for proper eye
protection.
WARNING:
eyewear can cause serious injury if
broken during the operation of a
power tool.
Ni-Cd
4.8V Ni-Cd
220rpm
1.01Lbs
3Nm
and
Operating
The
important
safeguards
WEAR
THAT
can
cause
Non-compliant
WARNING:
protection,
extended periods of operation of the
tool, or if the operation is noisy.
GENERAL SAFETY WARNINGS
WEAR A DUST MASK THAT
IS DESIGNED TO BE USED
WHEN OPERATING A POWER
TOOL IN A DUSTY ENVIRONMENT.
WARNING: Dust that is created
by power sanding, sawing, grinding,
and
drilling,
activities may contain chemicals
that are known to cause cancer,
birth defects, or other genetic
abnormalities.
include:
Lead from lead-based paints.
Crystalline silica from bricks, cement,
and other masonry products Arsenic
and chromium from chemically treated
EYE
lumber.
The level of risk from exposure to these
chemicals varies, according to how
often this type of work is performed.
In order to reduce exposure to these
chemicals, work in a well-ventilated
area, and use approved safety
equipment, such as a dust mask that
is specifically designed to filter out
microscopic particles.
WARNING: To avoid electrical
hazards, fire hazards or damage
to the power tool, use proper
circuit protection.
Use
particularly
and
other
construction
These
hearing
during
chemicals
2
Publicidad
Tabla de contenido
