Capacity And Draw Stud Selection Guide; Stainless Steel - Greenlee GATOR LS50L2 Manual Operación

Capacity and Draw Stud Selection Guide

Standard and Slug-Buster Punches / Draw Studs
Steel Gauge
10 ga. (0.134", 3 mm)
12 ga. (0.104", 2.5 mm)
14 ga. (0.074", 2 mm)
Slug-Splitter and Large 3-Point Punches / Draw Studs
Steel Gauge
10 ga. (0.134", 3 mm)
12 ga. (0.104", 2.5 mm)
14 ga. (0.074", 2 mm)
MILD STEEL
Electronic Connector Punches
Steel Gauge
16 ga. (0.0598", 1.5 mm) 33967 adapter, 1924AA spacer
Key
Item
Catalog No.
A 20963
B 2113B
C 29451
D 29452
E 1924AA
F 1557AA
Greenlee / A Textron Company
MILD STEEL
1/2" 3/4" to 1-1/4"
A, E B, E

STAINLESS STEEL

PIPE AND CONDUIT SIZE
1/2" 3/4" to 1-1/4"
C E, D
RS232, 229, 231, 234, 238
Draw Stud and Hardware
Description
3/8" X 4.8" draw stud
3/4" x 5.38" draw stud
7/16" x 4.25" draw stud (stainless steel)
3/4" x 5.5" draw stud (stainless steel)
7/8" spacer
1-1/8" x 3" punch sleeve
LS50L2 Battery-powered Punch Driver
PIPE AND CONDUIT SIZE
1-1/2" to 2" 2-1/2" to 3"
B
1-1/2" to 2"
N/A
D
13
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
3-1/2" to 4"
N/A
B
B, F