Johnson Controls P266 Serie Instrucciones De Instalación página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50
P266xxx-x Single-Phase Condenser Fan Speed Control
Dimensions (HxWxD)
Weight
Compliance
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult Johnson Controls Application Engineering at (414) 524-5535. Johnson Controls, Inc. shall not be liable for damages
resulting from misapplication or misuse of its products.
United States Emissions Compliance (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canadian Emissions Compliance
This Class (B) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
12
P266 Series Single-Phase Condenser Fan Speed Control Installation Instructions
Published in U.S.A.
159 x 177 x 70 mm (6-1/4 x 7 x 2-3/4 in.)
Heaviest Model Weight: 1.0 kg (2.2 lb)
Approximate Shipping Weight: 1.2 kg (2.6 lb)
Europe: Mark: CE Compliant; CENELEC EN 60947-1 & 4-2;
RoHS Directive (2002/95/EC); WEEE Directive (2002/96/EC)
North America: cULus File 244421;
FCC Compliant to CFR47, Part 15, Subpart B, Class B
Industry Canada (IC) Compliant to Canadian ICES-003, Class B limits
Australia: C-Tick Compliant (N1813)
Johnson Controls/PENN® are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners. © 2010 Johnson Controls, Inc.
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
www.johnsoncontrols.com

Publicidad

Tabla de contenido
loading

Tabla de contenido