Description Of Operation; Technical Details - Sagola DRY TECH DT2 Manual De Instrucciones

12/13

3. Description of operation

This appliance operates on the principle of infrared radiation.
It is particularly well suited to drying thin products such apaint products (mastic, primer, lacquers)
and any other product requiring high energy input. Infrared rays penetrate the backing material
and heat it by molecular agitation.
This method of drying form the inside out remove the solvents gradually and prevents the formation
of microbubbles. The infrared rays act only on expose surfaces and must therefore be directed only
on the area to be dried.
Infrared drying is a cost-saving method that guarantees a quick highquality result at a low cost.
When using for the first time, avoid all risks increase the distance and drying time.

4. Technical details

Input Voltage
Input Power
Curing Area
Temperature range
Time Setting
Light intensity
The DT2 is able to move upwards, downwards and rotate 360
1.500 mm.
220V / 50-60 Hz
2 x 1,000 w
800 x 800 mm.
o
40 - 75 C
0 - 60 min. (adjustable)
100%
1.000 mm.
ENGLISH
o